V Series Cast Iron Centrifugal Pumps

V Series Centrifugal Pumps are low maintenance, designed for long-life, and are easily serviceable–the impeller and seal can be serviced without disturbing piping or electrical connections. All pumps are close-coupled to heavy duty, ball bearing electric motors, and bolted directly to the receiver or a mounting channel below the receiver on elevated units. V Series Centrifugal units with fractional horsepower single-phase motors have built-in thermal overload protection.

Performance

VCS

1/3 through 10 HP – various 2′ NPSHr
Flow rates from 1.5 to 150 GPM
1,725 RPM – Discharge pressures are 10, 15, or 20 PSI
3,500 RPM – Discharge pressures range from 30 to 75 PSI

VES

3/4 through 2 HP – 2′ NPSHr
Flow rates from 9 to 97.5 GPM
1,750 RPM – Discharge pressures range from 15 to 30 PSI

VJS

1/2 through 2 HP
Flow rates from 1.5 to 97.5 GPM
3,500 RPM – Discharge pressures range from 10 to 50 PSI

VNS

1/2 through 7-1/2 HP – 2′ NPSHr
Flow rates from 9 to 90 GPM
3,500 RPM – Discharge pressures ranging from 20 to 60 PSI

Literature

V-Series Cast Iron Centrifugal Pumps Brochure 2026

V-Series O&M 2026

Standard Motor Types Available

ODP
TEFC
Wash-down Duty
Explosion-proof
Single-phase, 208 or 115/230 volt, 60 Hz
Three-phase, 208 or 230/460 volt, 60 Hz
Three-phase, 575 volt, on select models